Newport Fluid Power Practical fluid-power insight for UK engineers

Newport Fluid Power

Practical fluid-power insight for UK engineers

Latest Articles

Before You Strip the Circuit: Verifying Hydraulic Pressure Gauge Readings
Hydraulic Reliability

Before You Strip the Circuit: Verifying Hydraulic Pressure Gauge Readings

A hydraulic fault is sometimes an instrument fault. This troubleshooting guide examines snubber blockage, glycerine-filled gauge choices, isolation valve problems and calibration drift, with a short checklist for proving a pressure reading before dismantling a circuit.

Chafe, Kink, Repeat: A Walkaround Method for Hydraulic Hose Routes
Hydraulic Reliability

Chafe, Kink, Repeat: A Walkaround Method for Hydraulic Hose Routes

A chafed hose rarely fails without warning. This walkaround method gives UK maintenance teams a repeatable five-minute route check, a simple score to prioritise action, and a case study showing why rerouting can be cheaper than another call-out.

No Load, Still Paying: How Standby Pressure Drains Hydraulic Power Units
Hydraulic Energy Efficiency

No Load, Still Paying: How Standby Pressure Drains Hydraulic Power Units

Fixed-displacement pumps often hold pressure long after the machine has finished its work. This 2026 audit approach helps UK plants measure standby pressure and run-hours, quantify avoidable losses, and judge whether unloading valves, accumulators or variable-speed drives justify retrofit.

Dry Cylinders, Sticky Spools: Tracing Pneumatic Lubrication Faults
Compressed Air Efficiency

Dry Cylinders, Sticky Spools: Tracing Pneumatic Lubrication Faults

Mist lubricators are often installed and then forgotten, so dry cylinders, oil carryover and sticky valve spools get blamed on components downstream. This diagnostic guide looks upstream at FRL units, air quality, lubricator settings and damp UK conditions.

Frost-Proofing Hydraulics: A Winter Regime for UK Power Units
Hydraulic Reliability

Frost-Proofing Hydraulics: A Winter Regime for UK Power Units

UK winters bring repeated freeze-thaw cycles, damp air and unheated plant, all of which stress hydraulic systems before production even begins. This practical winter regime covers fluid checks, reservoir breathing, heater settings, outdoor lines and the cold-start habits that protect reliability.

Finding the Hiss in the System: A One-Week Compressed-Air Leak Audit
Compressed Air Efficiency

Finding the Hiss in the System: A One-Week Compressed-Air Leak Audit

A 1 mm compressed-air leak can cost hundreds of pounds a year at UK industrial energy prices. This step-by-step guide shows maintenance teams how to run a one-week leak audit, rank repairs by payback and feed the results into energy-reduction reporting.

Particle Counts, Not Top-Up Volumes: Reading ISO 4406 in Damp UK Plants
Hydraulic Reliability

Particle Counts, Not Top-Up Volumes: Reading ISO 4406 in Damp UK Plants

Topping up a reservoir restores the level, not the oil condition. This practical guide explains how ISO 4406 particle counts, filter ratings and breather choices reveal the contamination that a top-up can hide, with a troubleshooting routine for damp, cold UK workshops.