<?xml version="1.0" encoding="UTF-8"?>
<rss version="2.0" xmlns:atom="http://www.w3.org/2005/Atom">
<channel>
  <title>Newport Fluid Power</title>
  <link>https://newportfluidpower.co.uk/</link>
  <description>Practical fluid-power insight for UK engineers</description>
  <language>en</language>
  <lastBuildDate>Sun, 15 Nov 2026 00:05:25 GMT</lastBuildDate>
  <atom:link href="https://newportfluidpower.co.uk/feed.xml" rel="self" type="application/rss+xml"/>
  <item>
    <title>After the Repair, the Residue: A Flushing Regime for Contaminated Hydraulic Circuits</title>
    <link>https://newportfluidpower.co.uk/post-repair-hydraulic-circuit-flushing-regime/</link>
    <guid isPermaLink="true">https://newportfluidpower.co.uk/post-repair-hydraulic-circuit-flushing-regime/</guid>
    <description>A drain and refill only dilutes contamination; it does not clean the circuit. This article sets out a practical post-repair flushing protocol for UK hydraulic maintenance teams, from cleanliness targets and filter choice to sampling and verification, with a case study of a repeat failure avoided.</description>
    <author>Newport Fluid Power</author>
    <category>Hydraulic Reliability</category>
    <pubDate>Sat, 14 Nov 2026 19:45:24 GMT</pubDate>
  </item>
  <item>
    <title>Dead Legs and Dirty Ports: A Field Audit of Hydraulic Sampling Points</title>
    <link>https://newportfluidpower.co.uk/dead-legs-dirty-ports-field-audit-hydraulic-sampling-points/</link>
    <guid isPermaLink="true">https://newportfluidpower.co.uk/dead-legs-dirty-ports-field-audit-hydraulic-sampling-points/</guid>
    <description>Oil analysis begins at the test point, not in the laboratory. This field audit examines sample location, flush volume and bottle handling, and explains how poor sampling practice can produce false particle counts and misleading wear trends.</description>
    <author>Newport Fluid Power</author>
    <category>Hydraulic Reliability</category>
    <pubDate>Sat, 14 Nov 2026 15:46:39 GMT</pubDate>
  </item>
  <item>
    <title>The Silent Bypass: Proving Hydraulic Isolation Before a Festive Shutdown</title>
    <link>https://newportfluidpower.co.uk/silent-bypass-proving-hydraulic-isolation-festive-shutdown/</link>
    <guid isPermaLink="true">https://newportfluidpower.co.uk/silent-bypass-proving-hydraulic-isolation-festive-shutdown/</guid>
    <description>A shutdown only stays quiet if every hydraulic isolation point has been proved, not merely turned. This article outlines a practical pre-shutdown isolation proof for UK plant teams, covering stored-energy inventories, valve pass-by checks, gauge verification and permit-to-work records. The festive break is a useful deadline, but the method applies to any maintenance window.</description>
    <author>Newport Fluid Power</author>
    <category>Hydraulic Reliability</category>
    <pubDate>Fri, 13 Nov 2026 21:13:47 GMT</pubDate>
  </item>
  <item>
    <title>The Fastener Is the Seal: Auditing Flange Bolts on Hot Hydraulic Pipework</title>
    <link>https://newportfluidpower.co.uk/fastener-is-the-seal-flange-bolt-audit-hydraulic-pipework/</link>
    <guid isPermaLink="true">https://newportfluidpower.co.uk/fastener-is-the-seal-flange-bolt-audit-hydraulic-pipework/</guid>
    <description>Weeping SAE and split-flange joints are frequently re-sealed when the underlying problem is lost bolt preload, poor alignment or an uneven mating face. This workshop audit sets out how to inspect witness marks, verify flange gap and flatness, apply correctly lubricated torque and re-check joints after thermal cycling.</description>
    <author>Newport Fluid Power</author>
    <category>Hydraulic Reliability</category>
    <pubDate>Fri, 13 Nov 2026 13:34:11 GMT</pubDate>
  </item>
  <item>
    <title>Between Cut-In and Cut-Out: Verifying Pressure Switches on Unattended Hydraulic Plant</title>
    <link>https://newportfluidpower.co.uk/between-cut-in-and-cut-out-verifying-pressure-switches-unattended-hydraulic-plant/</link>
    <guid isPermaLink="true">https://newportfluidpower.co.uk/between-cut-in-and-cut-out-verifying-pressure-switches-unattended-hydraulic-plant/</guid>
    <description>Pressure switches on standby hydraulic power units can drift quietly out of calibration, narrowing the gap between cut-in and cut-out until the pump begins short cycling. This article outlines a practical verification route using a calibrated reference gauge, a controlled run and simple event logging, with attention to damp UK plant rooms and unattended systems.</description>
    <author>Newport Fluid Power</author>
    <category>Hydraulic Reliability</category>
    <pubDate>Thu, 12 Nov 2026 17:18:41 GMT</pubDate>
  </item>
  <item>
    <title>Beyond the Sight Glass: A Case-Drain Flow Protocol for Assessing Hydraulic Pump Condition</title>
    <link>https://newportfluidpower.co.uk/beyond-sight-glass-case-drain-flow-protocol-hydraulic-pump-condition/</link>
    <guid isPermaLink="true">https://newportfluidpower.co.uk/beyond-sight-glass-case-drain-flow-protocol-hydraulic-pump-condition/</guid>
    <description>Case-drain flow is often treated as a nuisance drip rather than a diagnostic signal. This practical protocol shows UK maintenance teams how to measure it safely, separate genuine internal wear from backpressure faults, and build repeatable baselines for common hydraulic pump types.</description>
    <author>Newport Fluid Power</author>
    <category>Hydraulic Reliability</category>
    <pubDate>Thu, 12 Nov 2026 07:25:47 GMT</pubDate>
  </item>
  <item>
    <title>Reading Warmth, Not Just Leaks: A Pre-Winter Thermal Route for Hydraulic Power Units</title>
    <link>https://newportfluidpower.co.uk/pre-winter-thermal-route-hydraulic-power-units/</link>
    <guid isPermaLink="true">https://newportfluidpower.co.uk/pre-winter-thermal-route-hydraulic-power-units/</guid>
    <description>A thermal camera can turn a hydraulic power unit into a visible reliability map before the winter production push. This walkaround method helps UK maintenance teams baseline normal heat patterns, spot restricted return filters, cooler bypass and coupling misalignment, and avoid the false positives that make thermography seem unreliable.</description>
    <author>Newport Fluid Power</author>
    <category>Hydraulic Reliability</category>
    <pubDate>Wed, 11 Nov 2026 14:12:11 GMT</pubDate>
  </item>
  <item>
    <title>Records Before Relief: A Pressure-System Readiness Audit for UK Fluid-Power Plant</title>
    <link>https://newportfluidpower.co.uk/records-before-relief-pressure-system-readiness-audit/</link>
    <guid isPermaLink="true">https://newportfluidpower.co.uk/records-before-relief-pressure-system-readiness-audit/</guid>
    <description>Pressure-system reviews often falter on incomplete records rather than obvious hardware failures. This audit treats written schemes, relief-valve settings and repair history as reliability evidence for hydraulic power units and compressed-air plant, with a practical checklist for UK maintenance teams.</description>
    <author>Newport Fluid Power</author>
    <category>Hydraulic Reliability</category>
    <pubDate>Tue, 10 Nov 2026 17:34:05 GMT</pubDate>
  </item>
  <item>
    <title>The Dryer&#039;s Winter Reckoning: Dew-Point Checks Before the First Frost</title>
    <link>https://newportfluidpower.co.uk/dryer-winter-reckoning-dew-point-checks-before-frost/</link>
    <guid isPermaLink="true">https://newportfluidpower.co.uk/dryer-winter-reckoning-dew-point-checks-before-frost/</guid>
    <description>Refrigerated and desiccant dryers are often trusted until the first cold snap exposes a blocked drain, a saturated filter or a sensor that has drifted. This pre-winter audit sets out practical checks for UK plant rooms, from portable dew-point verification to drain-trap cycling and low-ambient protection.</description>
    <author>Newport Fluid Power</author>
    <category>Compressed Air Efficiency</category>
    <pubDate>Tue, 10 Nov 2026 09:14:03 GMT</pubDate>
  </item>
  <item>
    <title>What the Reservoir Inhales: A Breather Audit for Damp Hydraulic Plant</title>
    <link>https://newportfluidpower.co.uk/reservoir-breather-audit-damp-hydraulic-plant/</link>
    <guid isPermaLink="true">https://newportfluidpower.co.uk/reservoir-breather-audit-damp-hydraulic-plant/</guid>
    <description>Reservoir breathers are small components with a direct path into the hydraulic oil, yet they are often left unchecked until water or particle counts rise. This audit method covers breather type, filtration rating, desiccant condition, mounting position and evidence-based change intervals for UK plants operating in damp conditions.</description>
    <author>Newport Fluid Power</author>
    <category>Hydraulic Reliability</category>
    <pubDate>Tue, 10 Nov 2026 05:20:42 GMT</pubDate>
  </item>
  <item>
    <title>Water Where It Should Not Be: A Receiver Drain Audit for UK Compressed-Air Plant</title>
    <link>https://newportfluidpower.co.uk/water-where-it-should-not-be-receiver-drain-audit/</link>
    <guid isPermaLink="true">https://newportfluidpower.co.uk/water-where-it-should-not-be-receiver-drain-audit/</guid>
    <description>Standing condensate in compressed-air receivers is often treated as a minor housekeeping issue, yet failed drains quietly undermine air quality, accelerate corrosion and create winter freeze risks. This audit route gives UK maintenance teams a practical way to check automatic drains, manual drop legs and moisture indicators before the 2026 cold season.</description>
    <author>Newport Fluid Power</author>
    <category>Compressed Air Efficiency</category>
    <pubDate>Mon, 09 Nov 2026 21:53:18 GMT</pubDate>
  </item>
  <item>
    <title>Below Atmospheric: Inlet Vacuum Checks for Hydraulic Pump Aeration</title>
    <link>https://newportfluidpower.co.uk/below-atmospheric-inlet-vacuum-hydraulic-pump-aeration/</link>
    <guid isPermaLink="true">https://newportfluidpower.co.uk/below-atmospheric-inlet-vacuum-hydraulic-pump-aeration/</guid>
    <description>A noisy pump and foaming oil often point to air entering the suction line rather than a failed pump. This guide sets out a structured inlet-vacuum check for UK maintenance teams, from gauge selection and temperature correction to tracing leaks at tank connections, hoses and joints.</description>
    <author>Newport Fluid Power</author>
    <category>Hydraulic Reliability</category>
    <pubDate>Mon, 09 Nov 2026 18:03:55 GMT</pubDate>
  </item>
  <item>
    <title>Cold Starts and False Alarms: Auditing Hydraulic Filter Bypass Indicators in UK Power Units</title>
    <link>https://newportfluidpower.co.uk/cold-starts-false-alarms-hydraulic-filter-bypass-audit/</link>
    <guid isPermaLink="true">https://newportfluidpower.co.uk/cold-starts-false-alarms-hydraulic-filter-bypass-audit/</guid>
    <description>A filter bypass indicator is often treated as a simple change-filter signal, but cold oil, high viscosity and blocked sensing ports can make it misleading. This workshop audit helps UK maintenance teams verify whether the element is genuinely loaded or the tell-tale is giving a false alarm.</description>
    <author>Newport Fluid Power</author>
    <category>Hydraulic Reliability</category>
    <pubDate>Mon, 09 Nov 2026 09:47:48 GMT</pubDate>
  </item>
  <item>
    <title>The Hidden Throttle: Auditing Quick-Release Couplings for Pressure Loss</title>
    <link>https://newportfluidpower.co.uk/hidden-throttle-quick-release-coupling-pressure-loss-audit/</link>
    <guid isPermaLink="true">https://newportfluidpower.co.uk/hidden-throttle-quick-release-coupling-pressure-loss-audit/</guid>
    <description>Quick-release couplings are bought for convenience, but mismatched or worn designs can impose a steady pressure penalty on pneumatic and hydraulic circuits. This article sets out a practical pressure-drop test and a UK workshop case where correcting coupling choices restored actuator speed without altering the compressor or pump.</description>
    <author>Newport Fluid Power</author>
    <category>Compressed Air Efficiency</category>
    <pubDate>Mon, 09 Nov 2026 02:11:10 GMT</pubDate>
  </item>
  <item>
    <title>Transients in the Dark: A Logging Campaign for Hydraulic Shock Loads</title>
    <link>https://newportfluidpower.co.uk/transients-in-the-dark-hydraulic-shock-logging-campaign/</link>
    <guid isPermaLink="true">https://newportfluidpower.co.uk/transients-in-the-dark-hydraulic-shock-logging-campaign/</guid>
    <description>Short pressure transients can fatigue manifolds long before a gauge shows anything unusual. This article sets out a practical one-week logging campaign for UK maintenance teams, covering transducer selection, trigger settings, trace interpretation and a manifold-crack case study.</description>
    <author>Newport Fluid Power</author>
    <category>Hydraulic Reliability</category>
    <pubDate>Sun, 08 Nov 2026 22:53:48 GMT</pubDate>
  </item>
  <item>
    <title>Worn Bores, Wasted Kilowatts: Scoring Hydraulic Cylinder Rebuilds Against Replacement</title>
    <link>https://newportfluidpower.co.uk/worn-bores-wasted-kilowatts-scoring-hydraulic-cylinder-rebuilds/</link>
    <guid isPermaLink="true">https://newportfluidpower.co.uk/worn-bores-wasted-kilowatts-scoring-hydraulic-cylinder-rebuilds/</guid>
    <description>Cylinder repair decisions are often made by habit, leading either to premature replacement or repeated rebuilds of worn bores and damaged rods. A scored matrix using bore wear, rod condition, seal kit cost, re-chroming lead times, downtime impact and UK repair-shop pricing gives maintenance teams a defensible route.</description>
    <author>Newport Fluid Power</author>
    <category>Hydraulic Energy Efficiency</category>
    <pubDate>Sun, 08 Nov 2026 18:56:51 GMT</pubDate>
  </item>
  <item>
    <title>Seals Age Before They Serve: Auditing Elastomer Storage in a Damp UK Workshop</title>
    <link>https://newportfluidpower.co.uk/seals-age-before-they-serve-damp-uk-workshop-storage-audit/</link>
    <guid isPermaLink="true">https://newportfluidpower.co.uk/seals-age-before-they-serve-damp-uk-workshop-storage-audit/</guid>
    <description>Unheated UK maintenance stores can age O-rings, seal kits and hoses long before they reach a cylinder or valve. This storage audit covers humidity, UV, ozone, bagging, date coding and stock rotation, with a pre-winter checklist for workshop managers.</description>
    <author>Newport Fluid Power</author>
    <category>Hydraulic Reliability</category>
    <pubDate>Sun, 08 Nov 2026 18:56:51 GMT</pubDate>
  </item>
  <item>
    <title>Measuring Rod Creep: A Workshop Protocol for Hydraulic Cylinder Drift</title>
    <link>https://newportfluidpower.co.uk/measuring-rod-creep-hydraulic-cylinder-drift-protocol/</link>
    <guid isPermaLink="true">https://newportfluidpower.co.uk/measuring-rod-creep-hydraulic-cylinder-drift-protocol/</guid>
    <description>Cylinder drift is often reported as a vague symptom rather than a measured fault. This workshop protocol uses a stopwatch, a rule and a thermometer to produce a repeatable drift rate, separate piston-seal bypass from valve leakage, and decide whether to monitor or repair.</description>
    <author>Newport Fluid Power</author>
    <category>Hydraulic Reliability</category>
    <pubDate>Sun, 08 Nov 2026 13:56:50 GMT</pubDate>
  </item>
  <item>
    <title>Before the 2026 Heatwave: A Cooler Margin Audit for Hydraulic Power Units</title>
    <link>https://newportfluidpower.co.uk/before-2026-heatwave-cooler-margin-audit-hydraulic-power-units/</link>
    <guid isPermaLink="true">https://newportfluidpower.co.uk/before-2026-heatwave-cooler-margin-audit-hydraulic-power-units/</guid>
    <description>UK hydraulic power units are often sized for temperate summers, not repeated heatwaves. This pre-summer audit checks air-blast airflow, water-cooler fouling, alarm settings and reservoir ventilation so that a cooling system running out of margin is found before production stops.</description>
    <author>Newport Fluid Power</author>
    <category>Hydraulic Energy Efficiency</category>
    <pubDate>Sun, 08 Nov 2026 13:56:50 GMT</pubDate>
  </item>
  <item>
    <title>Nitrogen Precharge: A Reliability Routine for Hydraulic Accumulators</title>
    <link>https://newportfluidpower.co.uk/nitrogen-precharge-reliability-routine-hydraulic-accumulators/</link>
    <guid isPermaLink="true">https://newportfluidpower.co.uk/nitrogen-precharge-reliability-routine-hydraulic-accumulators/</guid>
    <description>Accumulator precharge is often treated as a commissioning detail rather than a live maintenance parameter. This practical routine explains why nitrogen pressure drifts, what it costs in response and pump life, and how UK teams can check, adjust and record it safely.</description>
    <author>Newport Fluid Power</author>
    <category>Hydraulic Energy Efficiency</category>
    <pubDate>Sun, 08 Nov 2026 09:56:06 GMT</pubDate>
  </item>
  <item>
    <title>Before You Strip the Circuit: Verifying Hydraulic Pressure Gauge Readings</title>
    <link>https://newportfluidpower.co.uk/verifying-hydraulic-pressure-gauge-readings-before-repair/</link>
    <guid isPermaLink="true">https://newportfluidpower.co.uk/verifying-hydraulic-pressure-gauge-readings-before-repair/</guid>
    <description>A hydraulic fault is sometimes an instrument fault. This troubleshooting guide examines snubber blockage, glycerine-filled gauge choices, isolation valve problems and calibration drift, with a short checklist for proving a pressure reading before dismantling a circuit.</description>
    <author>Newport Fluid Power</author>
    <category>Hydraulic Reliability</category>
    <pubDate>Sun, 08 Nov 2026 09:56:06 GMT</pubDate>
  </item>
  <item>
    <title>Chafe, Kink, Repeat: A Walkaround Method for Hydraulic Hose Routes</title>
    <link>https://newportfluidpower.co.uk/chafe-kink-repeat-hydraulic-hose-route-walkaround/</link>
    <guid isPermaLink="true">https://newportfluidpower.co.uk/chafe-kink-repeat-hydraulic-hose-route-walkaround/</guid>
    <description>A chafed hose rarely fails without warning. This walkaround method gives UK maintenance teams a repeatable five-minute route check, a simple score to prioritise action, and a case study showing why rerouting can be cheaper than another call-out.</description>
    <author>Newport Fluid Power</author>
    <category>Hydraulic Reliability</category>
    <pubDate>Sun, 08 Nov 2026 05:59:39 GMT</pubDate>
  </item>
  <item>
    <title>No Load, Still Paying: How Standby Pressure Drains Hydraulic Power Units</title>
    <link>https://newportfluidpower.co.uk/standby-pressure-hydraulic-power-unit-audit/</link>
    <guid isPermaLink="true">https://newportfluidpower.co.uk/standby-pressure-hydraulic-power-unit-audit/</guid>
    <description>Fixed-displacement pumps often hold pressure long after the machine has finished its work. This 2026 audit approach helps UK plants measure standby pressure and run-hours, quantify avoidable losses, and judge whether unloading valves, accumulators or variable-speed drives justify retrofit.</description>
    <author>Newport Fluid Power</author>
    <category>Hydraulic Energy Efficiency</category>
    <pubDate>Sun, 08 Nov 2026 05:59:39 GMT</pubDate>
  </item>
  <item>
    <title>Dry Cylinders, Sticky Spools: Tracing Pneumatic Lubrication Faults</title>
    <link>https://newportfluidpower.co.uk/dry-cylinders-sticky-spools-pneumatic-lubrication-faults/</link>
    <guid isPermaLink="true">https://newportfluidpower.co.uk/dry-cylinders-sticky-spools-pneumatic-lubrication-faults/</guid>
    <description>Mist lubricators are often installed and then forgotten, so dry cylinders, oil carryover and sticky valve spools get blamed on components downstream. This diagnostic guide looks upstream at FRL units, air quality, lubricator settings and damp UK conditions.</description>
    <author>Newport Fluid Power</author>
    <category>Compressed Air Efficiency</category>
    <pubDate>Sun, 08 Nov 2026 02:00:59 GMT</pubDate>
  </item>
  <item>
    <title>Frost-Proofing Hydraulics: A Winter Regime for UK Power Units</title>
    <link>https://newportfluidpower.co.uk/frost-proofing-hydraulics-winter-regime-uk-power-units/</link>
    <guid isPermaLink="true">https://newportfluidpower.co.uk/frost-proofing-hydraulics-winter-regime-uk-power-units/</guid>
    <description>UK winters bring repeated freeze-thaw cycles, damp air and unheated plant, all of which stress hydraulic systems before production even begins. This practical winter regime covers fluid checks, reservoir breathing, heater settings, outdoor lines and the cold-start habits that protect reliability.</description>
    <author>Newport Fluid Power</author>
    <category>Hydraulic Reliability</category>
    <pubDate>Sun, 08 Nov 2026 02:00:59 GMT</pubDate>
  </item>
  <item>
    <title>Finding the Hiss in the System: A One-Week Compressed-Air Leak Audit</title>
    <link>https://newportfluidpower.co.uk/finding-the-hiss-one-week-compressed-air-leak-audit/</link>
    <guid isPermaLink="true">https://newportfluidpower.co.uk/finding-the-hiss-one-week-compressed-air-leak-audit/</guid>
    <description>A 1 mm compressed-air leak can cost hundreds of pounds a year at UK industrial energy prices. This step-by-step guide shows maintenance teams how to run a one-week leak audit, rank repairs by payback and feed the results into energy-reduction reporting.</description>
    <author>Newport Fluid Power</author>
    <category>Compressed Air Efficiency</category>
    <pubDate>Sat, 07 Nov 2026 22:05:31 GMT</pubDate>
  </item>
  <item>
    <title>Particle Counts, Not Top-Up Volumes: Reading ISO 4406 in Damp UK Plants</title>
    <link>https://newportfluidpower.co.uk/particle-counts-not-top-up-volumes-iso-4406-damp-uk-plants/</link>
    <guid isPermaLink="true">https://newportfluidpower.co.uk/particle-counts-not-top-up-volumes-iso-4406-damp-uk-plants/</guid>
    <description>Topping up a reservoir restores the level, not the oil condition. This practical guide explains how ISO 4406 particle counts, filter ratings and breather choices reveal the contamination that a top-up can hide, with a troubleshooting routine for damp, cold UK workshops.</description>
    <author>Newport Fluid Power</author>
    <category>Hydraulic Reliability</category>
    <pubDate>Sat, 07 Nov 2026 22:05:31 GMT</pubDate>
  </item>
</channel>
</rss>